BOOT from SCSI SCREEN SHOTS
01/14/2005 In the morning while I was waiting for the Titan landing
news, I installed NetBSD/vax 1.6.1 from a SCSI CDROM (IBM CR-504B, made
by Matsushita-Motobuki) to the SCSI hard drive (Quantum Maverick
Prodrive, now mounted at rq0 and with its own size). In the midnight,
after I found a work around of the SA register bug, I successfully
booted NetBSD from the SCSI HD.
System Setup. The small HD on top is the Quantum; The middle is the IBM
CDROM; The bottom is a MAXTOR (not connected). In the computer drive
bay, there are a floppy drive and a SCSI HD (a MAXTOR, holds the
development software).
Booted NetBSD/vax 1.6.1 from the SCSI HD mounted as rq0
shutdown -h now (First command stucked, then returned to prompt after I pressed Enter. Why?
